Sony SLV-E730EX/UX - Manual (Page 13)

Getting Started
Getting Started
13
4
Press RF CHANNEL.
You have now tuned your TV to the VCR. From now on, whenever
you want to play a tape, set the TV to the video channel.
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 3 above, press PROGRAM +/–
in step 3, so that another RF channel appears. Then tune the TV to the new
RF channel until a clear picture appears.
RF CHANNEL