Sony SLV-E730EX/UX - Manual (Page 17)

Getting Started
Getting Started
17
Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/–
buttons.
1
In step 6 above, press programme number button “0” twice to display
the number “00” beside CHANNEL SET.
2
Press the joystick (OK).
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/– or the programme number buttons to select the
programme number for which you cannot obtain a clear picture.
2
Press MENU, then select SETTINGS and press the joystick (OK).
3
Select TUNER, then press the joystick (OK).
4
Select FINE TUNING.
The fine tuning meter appears.
5
Push the joystick to ?// to get a clearer picture, then press the
joystick (OK).
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
• The menu disappears automatically if you don’t proceed for more than a few
minutes.
Selected programme
position PROG 4
NORMAL / CATV
CHANNEL SET
[ ] C
[ ] NORM
TUNER
AFT [ ] ON
FINE TUNING
5 6
– – – – – – – –
SELECT
SET :
:
CH4