Sanyo DSR-C100 - Manual (Page 11)

Monitor display
Indicator
Camera status
Warning
Caution
(ON)
Caution
(OFF)
Fast
flashes Fast
flashes
Off
4 When there is 20 minutes or less of
recording time remaining in the
post-alarm recording area, or
When post-alarm 2 recording is
complete (suspicion recording
possible)
5 When there is a problem with the
camera hardware (recording is not
possible)
6 When there is a problem with the
hard disk (recording is not possible)
7 When Ni-Cd battery is not installed
or not connected (NO BATT)
When there is a problem with the
Ni-Cd battery (LOW BATT)
When time setting has not been
carried out
During hard disk initialization (ö)
During memory card initialization
Note: If you do not need the caution indicator to operate (lighting or flashing), you can set it to remain off
at all times by setting CAUTION LED to “OFF” in the SYSTEM SET screen.
However, the ö mark indicates times when the caution indicator flashes regardless of the CAUTION
LED setting.
4
5
6
<ALARM REC FULL> HDD WARN <ALARM REC FULL> HDD WARN
SYSTEM SYSTEM
ERROR ERROR
LOW BATT LOW BATT
<ALARM REC FULL> HDD WARN
SYSTEM
ERROR
LOW BATT
7
NO BATT
Warning indicator
Caution indicator
L42A4/US (DSR-C100) GB 2001, 4, 16
10 English