Sanyo DSR-C100 - Manual (Page 6)

FEATURES
Equipped with a 3.5-inch hard disk
The images are recorded directly to the camera’s
hard disk. The saved images can then be
manipulated using a CompactFlash card and a
personal computer.
The following four recording modes are
available.
• Pre-alarm recording
This is normal recording. The images are saved
in the pre-alarm area of the hard disk.
• Post-alarm recording
When a hold-up switch which is connected to
the H (HOLD-UP) terminal at the rear of the
camera is operated, post-alarm recording starts,
and the recorded images are saved in the
post-alarm area of the hard disk.
• Backup recording
If there is 20 minutes or more of available
recording time remaining in the alarm recording
area of the hard disk when the first post-alarm
recording session ends, backup recording then
starts.
• Suspicion recording
When a suspicion switch which is connected to
the S (SUSPICION) terminal at the rear of the
camera is operated, images such as those of
suspicious individuals are saved in the suspicion
area of the hard disk.
Multi-playback function
The captured images in hard disk can then be
played back in an instant. Special playback
functions such as multi-screen display, reverse
playback, frame jogging and zooming are all
possible. In addition, images can easily be copied
(saved) as required.
RS-232C connector/USB connector equipped
as standard
A computer can be connected to allow image data
to be transmitted at high speeds.
ACCESSORIES
1 AC adaptor
2 Relay connector
3 Ni-Cd battery (for backup)
4 Application software (CD-ROM)
a Power cord
1
2 3
4
L42A4/US (DSR-C100) GB 2001, 4, 16
English 5