Sony CCU-D50P - Manual (Page 8)

8
Overview
Return video signals
When this unit is connected to a camera via a CA-D50
or CA-537/537P Camera Adaptor or when it is
connected to a DSR-370/370P/570WS/570WSP
camcorder, return video signals can be sent to the
camera/camcorder.
Note
When using a CA-537/537P with a serial number of
33271 or higher, set the return signal mode to B&W
(see “qh System setting switches” on page 18).
Prompter signals
Prompter signals can be sent to a camera adaptor when
this unit is connected to a CA-D50 or a CA-537/537P
with a serial number of 33271 or higher. When sending
prompter signals, set the return signal mode to B&W
(see “qh System setting switches” on page 18).
When a DSR-370//370P/570WS/570WSP camcorder
is connected to this unit, it is not possible to send
prompter signals to the camcorder.
Camera Cable Length
When using an optional CCZ-An camera cable (n in
the model name is a number expressing the cable
length in meters), analog transmission distance can be
extended up to a maximum of 300 meters (about 999
feet), and digital transmission distance can be extended
up to about 75 m (about 246 feet). Use the CABLE
COMP buttons (see page 17) on this unit to set a cable
compensation value according to the length of the
cable you are using.
When a DSR-370//370P/570WS/570WSP camcorder
is connected to this unit, reference sync signal and
return signal transmission distance can be extended up
to 150 m (about 492 feet).
Rack mounting brackets
(supplied)
Rack Mounting
The unit can be mounted in a standard 19-inch studio
rack with the supplied mounting brackets.
For more information about rack mounting, contact your
Sony dealer or a Sony service representative.