Sharp FO-3150 - Manual (Page 22)

Loading Printing Paper
20
5
Insert the stack of paper firmly into the
tray, print side up.
•
Make sure that the stack is not higher
than the marked line. Loading too much
paper may cause paper jams and
misfeeds.
•
If paper remains in the tray, take it out
and combine it into a single stack with
the new paper before adding the new
paper.
Important:
Be sure to load the paper so that printing takes place on the print side of the
paper. Printing on the reverse side may result in poor print quality.
6
Make sure the stack of paper is aligned
against the right paper guide, and then
gently move the left paper guide to the
8 1/2 position for letter or legal paper,
or the A4 position for A4 paper.
7
Push the paper release lever back
down.
•
Note: If the paper does not feed
correctly, remove the entire stack from
the tray and repeat the loading
procedure from the beginning.
8
Replace the paper tray cover.
•
If you loaded other than letter size
paper (or you changed the paper size),
change the paper size setting as
explained on the following page.