Smeg SC712U - Manual (Page 13)

Instructions for the User
15
5.5.3 Using the timer
Press PT1 once (while the oven is in STAND-BY or ON mode). The display will show the value
(steady on) and the symbol (flashing). Turn PT1 to set the cooking time (from 00:01 to 04:00). A few
seconds after the desired amount of cooking time is set, the symbol will stop flashing and remain
steady on; the countdown will then start. Now select the desired cooking function and wait for the buzzer
to sound, indicating that the cooking time has elapsed.
Press PT1 once to shut off the buzzer; the cooking time can be extended by turning PT1.
If the timer was set with the oven in STAND-BY mode, when the oven is activated in ON mode (selection
of a cooking operation), the counter is reset to zero.
Warning: the timer does not stop the cooking process. It only alerts the user that the preset number of
minutes has elapsed. Press PT2 to turn off the oven.
Changing the timer setting
After setting the countdown, press PT1 once. The symbol starts flashing; turn PT1 to change the set
duration. A few seconds after the new value is set, the symbol will stop flashing and the countdown
will restart from the new value.
5.6 Programmed cooking procedures
5.6.1 Semiautomatic cooking
Semiautomatic cooking is the function which allows a cooking operation to be started and then ended
after a specific length of time that is set by the user.
Select an oven function (see paragraph “5.5 Selecting an oven function”) and press PT1 twice. The
display will show the value and the symbol (flashing).
Turn PT1 to the right or left to set the cooking time (from 00:01 to 23:59). A few seconds after the desired
cooking time is set, the symbol will stop flashing and semiautomatic cooking will start from that
moment. When the cooking time has eleapsed, the word STOP will be displayed on DSP1, cooking will
stop and a buzzer will sound; press PT1 to silence it.
If you wish to lengthen the cooking time, press PT1 again. The oven will restart normal operation with
the cooking settings selected previously. However, PT2 must be pressed to turn the oven off completely.
Changing the cooking settings
The cooking time can de changed after semiautomatic cooking has started.
When the symbol is steady on and cooking is in progress, press PT1 once. The symbol starts
flashing and PT1 can be turned to change the cooking time. A few seconds after the last change, the
symbol will stop flashing, and semiautomatic cooking will restart using the new value.
To change the preset temperature, wait for the symbol to turn steady and turn PT1 to the right or left
to raise or lower the cooking temperature.