SIIG 04-0202A - Manual

1
Low Profile PCI I/O
Quick Installation Guide
04-0202A
Introducing the Low Profile PCI I/O
The Low Profile PCI I/O conforms to the new PCI card form factor
standard made for space constrained system designs. Since this
installation guide is written for both, Low Profile PCI -1S and Low Profile
PCI -1P boards, some features on this installation guide might not be
present on the model you bought. Please only refer to the features that
apply to your board.
Features and Benefits
• Conforms to PCI v2.2 Plug and Play
• Full support for DOS- and Windows-based software
• IRQ sharing feature eliminates IRQ conflicts
Serial interface:
• High-speed 16550 UART serial port (9-pin) supports baud rates
up to 920Kbps. Works with various types of serial devices
• Built-in 16-byte FIFO buffers dramatically increase data transmit/
receive speed
Parallel interface:
• Conforms to IEEE 1284-1994 parallel port standard
• High-speed parallel port supports various types of parallel port
devices
• Supports EPP, ECP(PIO mode), Bi-directional Parallel Port (BPP)
and Standard Parallel Port (SPP) modes
Dimensions:
• PCB: 119.91 mm (L) x 64.41 mm (H)
• Bracket: 18.42 mm (W) x 79.20 mm (H)
System Requirements
• Pentium or equivalent computer with an available 32-bit PCI slot
• DOS/Windows 3.1x, Windows 95/98/98 SE/ME/NT 4.0/2000