Sun Microsystems Sun Fire X4150 - Manual (Page 119)

Appendix A Command-Line Interface Reference 103
-> help reset
Use the reset command to reset a target.
Usage: reset [-script] [target]
Available options for this command:
-script : do not prompt for yes/no confirmation, and act as if yes was specified.
set
Use the set command to change the value of a property associated with a target.
Syntax
set [target] property=value [ propertyname=value]
Options
[-h help]
Targets, Properties, and Values
TABLE A-10 set Command Targets, Properties, and Values
Valid Targets Properties Values Default
/SP/User/ username password
permission string
administrator|operator (None)
operator
/SP/clock Date
Time
NTPstatus
NTPserver MM/DD/CCYY
hh/mm/ss
enabled|disabled
ipaddress /SP/clock
/SP/AgentInfo/SNMP port
snmpset
version1
version2
version3 decimal
enabled|disabled
enabled|disabled
enabled|disabled
enabled|disabled 161
disabled
disabled
disabled
enabled