SMC Networks EliteConnect SMC2536W-AG2 - Manual (Page 25)

SMC2536W-AG2 User Guide
11
Chapter 3. Configuration
The SMC2536W-AG2 can be configured by the SMC2536W-AG2 Wireless Client Utility (SMC
WCU). This chapter describes how to configure your SMC EliteConnet™ Dualband Wireless
Cardbus Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use
the data security encryption features.
After Installing the SMCWCU icon will appear in your system tray. It appears at the bottom of
the screen, and shows the wireless connection status.
If the icon is red, there is no wireless connection.
If the icon is green a wireless connection is established.
Double-click the icon and the SMC WCU will run. You can also run the utility by clicking the Start >
Program > SMC > SMC2536W-AG2 Wireless Client Utility. The SMC WCU provides a complete
and easy to use set of tools to:
¾
Display current status information
¾
Edit and add configuration profiles
¾
Display current diagnostics information
The section below introduces these above capabilities.
3.1 Current Status
The Current Status tab contains general information about the program and its operations. The
Current Status tab does not require any configurations.