Savin 3150eDNP - Manual (Page 31)

OPERATION
10
1
Adjusting The Print Image Density
You can adjust the print image densi-
ty to suit your needs. There are two
ways:
❖ ❖ ❖ ❖ Before Making A Master
Adjust the image density using the
{Image Density} key.
❖ ❖ ❖ ❖ After Making A Master
Adjust the image density using the
{W} or {V} key.
Before Making A Master
A
Use the {{{{Image Density}}}} key before
pressing the {{{{Start}}}} key.
After Making A Master
A
Press the {{{{W W W W}}}} or {{{{V V V V}}}} key. To in-
crease the speed, press the
{{{{V V V V}}}}
key. To reduce the speed, press
the
{{{{W W W W}}}} key.
Note
❒ The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
TSLS016N
TSLS017N