Savin 3150eDNP - Manual (Page 33)

OPERATION
12
1
Fine Mode—Making Clear Prints
Use the {Fine} key to make clear
prints.
A
Press the
{{{{Fine}}}} key to select Fine
mode.
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the {{{{Start}}}} key. Check the
image position of the trial or
proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {Image
Position } keys (see ⇒
P.8 “Ad-
justing The Print Image Position”)
or the side table fine adjusting
dial (see
⇒
P.8 “Shifting The
Print Image Position To The Right
Or Left”).
D
Enter the number of prints with
the
{{{{Number}}}} keys.
E
Press the {{{{Print}}}} key.
TSLS019N
TSLS012N
TSLS014N