Step 3: preparing for network connection, Step 4: easy setup, Wired setup – Sony Blu-ray Disc/DVD Player BDP-S390 User Manual

Page 16: Wireless setup

Advertising
background image

16

*1

See “Step 1: Supplied Accessories”
(page 13).

*2

Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic, and the
double-D symbol are trademarks of Dolby
Laboratories.

*3

Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380;
6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other
U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-
HD and the Symbol together are registered
trademarks & DTS-HD Master Audio is a
trademark of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.

Step 3: Preparing for
Network Connection

If you are not going to connect the player
to a network, proceed to “Step 4: Easy
Setup” (page 16)
.

Use a LAN cable to connect to the LAN
(100) terminal on the player.

z

Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.

Use the wireless LAN that is built into
the player.

Step 4: Easy Setup

1

Insert two Size AA (R6) batteries
by matching the
3 and # ends on
the batteries to the markings
inside the battery compartment.

Wired Setup

ADSL modem/
Cable modem

Broadband
router

LAN cable
(not supplied)

Internet

Wireless Setup

When turned on for the first time

Wait for a short while before the
player turns on and starts [Easy
Initial Settings].

Wireless LAN
router

ADSL modem/
Cable modem

Internet

LAN cable (not supplied)

Advertising
This manual is related to the following products: