Siemens SIPASS STANDALONE ACS3110 - Manual (Page 5)

Basic information
1 Basic information
SiPass standalone is a complete access control system for one door and up to 500
cardholders. SiPass standalone uses 125 kHz proximity technology. For gaining
access, it is sufficient to hold the badge close to the reader.
For programming purposes, an optional Remote Programmer can be used, which
is simply held close to the reader the same way as a user badge. No wiring con-
nection is required.
2 Access modes
SiPass standalone can operate in 2 modes:
Access mode Normal access, no door contact monitoring
Night lock Access for ”Special user” badges only.
No access for normal user badges.
2.1 Tag types
The proximity cards shown in this document remain valid. The old badges com-
pared to the new card design are shown in the table below.
Old Typ New
Void Master
Void
Program Master
Program
Add Master
Add
Night lock master
Night lock
User
User
5
Siemens Building Technologies
Fire Safety & Security Products 02.2005