Sony DSR-85 - Manual (Page 16)

Location and Function of Parts
Chapter 1 Overview
16
Chapter 1 Overview
2
Digital signal input/output section
QSDI
INPUT OUTPUT
DIGITAL AUDIO (AES/EBU)
CH-1/2 CH-3/4
INPUT OUTPUT
CH-1/2 CH-3/4
9 S VIDEO IN connector (4-pin)
Input an S-video signal with separated Y (luminance)
and C (chroma: 3.58 MHz for DSR-85 and 4.43 MHz
for DSR-85P) components. 0 S VIDEO OUT connector (4-pin)
Outputs an S-video signal with separated Y
(luminance) and C (chroma: 3.58 MHz with DSR-85
and 4.43 MHz with DSR-85P) components.
1 QSDI INPUT connector (BNC type)
Input video, audio and time code signals in the QSDI
format.
2 QSDI OUTPUT connector (BNC type)
Outputs video, audio and time code signals in the
QSDI format when the unit is in playback mode, but
outputs no EE signals.
Note
In search mode, this connector outputs unprocessed
audio signals. If you are monitoring this audio signal
on another device, the sound may be different from the
playback output of this unit.
1 QSDI INPUT connector
2 QSDI OUTPUT connector
3 DIGITAL AUDIO (AES/EBU) INPUT connectors
4 DIGITAL AUDIO (AES/EBU) OUTPUT connectors
3 DIGITAL AUDIO (AES/EBU) INPUT
connectors (XLR 3-pin, female)
Input digital audio signals in the AES/EBU format.
4 DIGITAL AUDIO (AES/EBU) OUTPUT
connectors (XLR 3-pin, male)
Output digital audio signals in the AES/EBU format.