Sony HWS-BTA2W - Manual (Page 15)

15
US
Using as a Transmitter
This unit transmits music played on a stereo audio source device connected to this unit to a
BLUETOOTH stereo audio receiving device.
Note
For details on how to operate the devices to be connected, refer to the operating instructions supplied
with each device.
Preparation
1
Connect the headphone jack of a stereo audio source device to the
AUDIO IN jack of this unit with the supplied connecting cable.
AUDIO IN
Note
Be sure to connect this unit to the headphone jack of the stereo audio source device to be connected.
If this unit is connected to the LINE OUT jack of the device to be connected, sound may be distorted.
If the stereo audio source device has switching between headphone and LINE OUT on the same
jack, use the headphone setting.
2
Connect the supplied AC power adaptor to the DC IN 4.5 V jack on
this unit.
When using this unit in a car, use the Car Battery Cord DCC-E345 (optional).
3
Set the TX/RX switch to “TX.”
RX
TX
To AUDIO IN jack
To
headphone
jack
This unit
Connecting cable
(supplied)
To AC outlet
To DC IN
4.5 V jack This unit
AC power adaptor
(supplied)
This unit
BLUETOOTH stereo
audio receiving device
Computer or
other stereo
audio source
device
Example
Computer or
other stereo
audio source
device