Safety, Warning, 5“save these instructions – Skil 3800-02 User Manual

Page 5

Advertising
background image

5

“SAVE THESE INSTRUCTIONS”

To reduce risk of injury, user must read and understand

the instruction manual.

s

Wear eye and respiratory

protection.

s

Use saw blade rated 4,800/min or greater.

s

Do not use saw

without functioning guard system. If guard doesn’t operate smoothly, have
it serviced. After changing blade return guard to operating position.

s

Keep

hands a safe distance from saw blade. Always keep outside of No-Hands
zone.

s

Hold or clamp workpiece against base and fence. Never perform

any operation freehand.

s

Do not Cross-Hand cut. Never place your hands

or arms across the projected saw blade path. With motor OFF, make a Dry-
Run to be aware of the blade’s reach.

s

After turning saw OFF, keep saw in

the down position and wait for blade to stop before removing cutoff pieces or
changing settings.

s

To avoid electrical shock, do not expose to rain or use

in damp locations.

s

When servicing use only identical replacement parts.

s

For bevel or compound cutting, adjust sliding

fence clear of blade path and guard system.

WARNING

Robert Bosch Tool Corp., Mount Prospect, IL Made in China

Ø10"(254mm) COMPOUND MITER SAW F012380002

120V~ 50/60Hz 15A n

o

4,800/min (RPM)

E152254

LISTED TOOL 293G

6A3

3800

Do not allow familiarity gained from frequent use of your miter saw to become commonplace. Always remember that
a careless fraction of a second is sufficient to inflict severe injury.

THINK SAFETY! SAFETY IS A COMBINATION OF OPERATOR’S COMMON SENSE, KNOWLEDGE OF THE SAFETY
AND OPERATING INSTRUCTIONS AND ALERTNESS AT ALL TIMES WHEN THE MITER SAW IS BEING USED.

THE WARNINGS SHOWN BELOW CAN BE FOUND ON YOUR TOOL. THESE WARNINGS ARE ONLY A
CONDENSED FORM OF THE MORE DETAILED SAFETY RULES AND PRECAUTIONS THAT APPEAR IN

YOUR OWNER'S MANUAL. THEY SERVE AS A REMINDER OF ALL SAFETY RULES NEEDED FOR SAFE OPERATION OF
THIS MITER SAW.

Safety

“READ ALL INSTRUCTIONS” — Failure to follow the SAFETY RULES identified by BULLET (l) symbol listed
BELOW and other safety precautions, may result in serious personal injury.

WARNING

!

WARNING

!

DESIGNATED DANGER ZONE.
AVOID POSITIONING HANDS,
FINGERS OR ARMS IN THE
AREA DESIGNATED BY THIS
SYMBOL.

Advertising