Sharp LL-T2020 - Manual (Page 26)

26
Specifications
Product specifications
LCD display
51 cm measured diagonally
Advanced Super-V and Anti Glare Low Reflection
TFT LCD module
Resolution (max.)
UXGA 1600 x 1200 pixels
Displayable colors (max.)
Approx. 16.77 million colors (8 bit)
Brightness (max.)
220cd/m 2
Dot pitch
0.255(H) x 0.255(V) mm
Contrast ratio
350:1
Angle of visibility
Left-right 170° ; Up-down 170°
(contrast ratio
>
=
10)
Screen display size
Horizontal 408 mm x Vertical 306 mm
Video signal
Analog: Analog RGB (0.7Vp-p) [75 Ω]
Digital: DVI standard based on 1.0
Sync signal
Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)
Expansion compensation
Digital scaling
(Enlargement VGA/SVGA/XGA/SXGA etc. to full
screen size. )
Plug & Play
VESA DDC2B compatible
Power management
VESA: based on DPMS
DVI:
based on DMPM
Input signal terminal
29 pin DVI-I x 2
USB hub function
1 upstream port, 2 downstream ports
(selfpowered hub based on USB standard Rev
1.1)
Height adjustment
Adjustment range: Approx. 60 mm
Screen rotation
Clockwise 0 - 90°
Screen tilt
Upward approx. 0 -30° ; downward approx. 0 - 5°
Screen swivel
Approx. 90° from left through right
Power supply
AC100 - 240V, 50/60Hz
Temperature of operating environment
5 - 35° C
Power consumption
53W (Not using USB hub)
(60W maximum, 3W when in power-saving
mode)
Dimensions (W x D x H) (Units: mm)
With long width screen: 450 x 228 x 438 - 498
With long heightscreen: 348 x 228 x 490 - 550
Weight
Approx. 10 kg
Display area only, approx. 6.5kg
Dimensions (Units: mm)
450
228
438
348 498
348
490
450 550
310
- Analog signal cable: Approx. 2.0m
- Digital signal cable : Approx. 2.0m
- USB cable : Approx. 2.0m
- Digital signal cable, NL-C04J (purchased
separately): Approx. 2.0m
- Analog signal cable, NL-C02E (purchased
separately): Approx. 2.0m
- 2-input cable, NL-C03J (purchased
separately): Approx. 0.25m