Sharp PN-455 - Manual (Page 34)

34
E
■ MODE SELECT 2
[OFF TIMER]
Function Specifies the remaining time before turning off the power.
Adjustable range 0 - 23
Default 0
[OSD H-POSITION]
Function Adjusts the horizontal display position of menu screen.
How to adjust Use / to move menu screen.
Default Center
[OSD V-POSITION]
Function Adjusts the vertical display position of menu screen.
How to adjust Use / to move menu screen.
Default Center
[LANGUAGE]
Function Switches the OSD language.
Available languages ENGLISH / DEUTSCH / FRANÇAIS / ITALIANO / ESPAÑOL
Default ENGLISH
[ID NO SET]
Function Assigns ID numbers to monitors connected in a daisy chain (see page 39), using
RS-232C cables.
Adjustable range 0 - 255
Default 0
Note The numbers 1 to 255 are available for ID numbers. (If “0” is set, the system
regards this as the state where no ID number is set.) Although numbers up to 255
can be used for monitor IDs, the number of connectable monitors varies depending
on the length of RS-232C cables and the installation environment.
Use / to increase or decrease values.
Settings and Adjustments
(Continued)