Superior Z200 - Manual (Page 39)

This is the Internet version of the user's guide. © Print only for private use.
Setting up WAP 39
GPRS settings that are available:
• APN (Access point name address) – the address
of the external data network you want to connect
to, either an IP address or a text string.
• User ID – your user id to log on to the external
data network.
• Password – your password to log on to the external
data network.
• Pwd. Request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
• Allow Calls (Preferred service) – if you want
to be able to accept incoming calls during
a GPRS session, select Automatic. If not,
select GPRS Only.
• IP Address – the IP address that the phone uses
when communicating with the network. If you
do not enter an address, the network provides
you with a temporary IP address.
• DNS Address – if the network does not provide
the IP address to the DNS server automatically,
you may enter it here.
• Advan. Settings (Advanced settings) – these are
optional. Consult your network operator.
GSM
GSM settings include some settings that are
similar to GPRS settings and some that are
GSM-specific as follows:
• Phone Number – the phone number
of your Internet service provider.
• Data Rate – select the speed you want for the
connection.
• Dial Type – select analog or ISDN connection.
To create a data account manually
1. Scroll to Connect,
YES
, Data Comm.,
YES
,
Data Accounts,
YES
, Add account?,
YES
.
2. Select an account type for access.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing
YES
.
5. Scroll to Save?,
YES
.
To edit a data account
1. Scroll to Connect,
YES
, Data Comm.,
YES
,
Data Accounts,
YES
.
2. Select a data account,
YES
.
3. Select Edit.