Superior Z200 - Manual (Page 40)

This is the Internet version of the user's guide. © Print only for private use.
40 Setting up WAP
4. Select the setting you want to edit,
YES
. Edit the
setting,
YES
.
5. Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
Note: To see the status of GPRS coverage and
connection in standby look at the triangle above
the signal strength indicator. If the triangle is
filled GPRS is available. Otherwise it is not.
To select preferred mode
Scroll to Connect,
YES
, Data Comm.,
YES
,
Pref. Service,
YES
, and select GPRS and GSM
or GSM Only.
WAP profile settings
The WAP settings are stored in a WAP profile.
In most cases you only need to use one profile
to access the Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites such
as a banking site or a corporate intranet. You then
simply switch between profiles when you need
to change the network connection.
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
“Data account settings” on page 38.
2. Scroll to WAP Services,
YES
, Options,
YES
,
WAP Profiles,
YES
.
3. Select Add profile? to add a new profile or select
an existing profile that you want to edit,
YES
.
To enter information in a new profile
When selecting Add profile? enter a name for the
profile,
YES
, Connect using:,
YES
, select the data
account to be used,
YES
and enter the IP address:,
YES
. A list appears. Scroll to Save?,
YES
.
To edit an existing profile
When selecting an existing profile, you can do the
following:
• Rename – Change the name of the profile.
• Connect Using – Select data account.
• IP Address – WAP gateway server address.
• Advanced – More profile settings, see below.
• Delete – Remove the profile.