Sony KF-42WE620 User Manual
Page 83
Other Information
83
Ot
h
e
r Informa
tion
KF-42/50WE620
2-108-981-13 (1)
Remote Control
Video
Problem
Possible Remedies
Remote control does not
operate
❏
The batteries could be weak. Replace the batteries.
❏
Check the orientation of the batteries. (Batteries are installed correctly.)
❏
Press FUNCTION (DVD/VCR, SAT/CABLE or TV) to select the equipment that
you want to operate.
❏
Press the TV button first for TV operation.
❏
Make sure this unit’s power cord is connected securely to the wall outlet.
❏
Locate the unit at least 3-4 feet away from fluorescent lights.
Cannot change channels with
the remote control
❏
If you are using the TV to change channels, first press the TV FUNCTION
button.
❏
If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the Channel
Fix option to “fix” the channel based on the hookup you used (see page 67).
❏
If you are using another device to change channels, be sure to press FUNCTION
(DVD/VCR, SAT/CABLE or TV) for that device.
Remote control does not
operate non-Sony video
equipment
❏
If you replaced the batteries to the remote recently, the code numbers for the video
equipment may need to be reset.
❏
There may be more than one code for the equipment that you are attempting to
operate.
❏
There is a possibility that some non-Sony equipment cannot be operated by your
Sony TV remote.You may need to use the equipment’s original remote control.
Problem
Possible Remedies
No picture (screen not lit), no
sound
❏
If your LCD projection TV does not turn on, and a red light keeps flashing, your
LCD projection TV may need service. Call your local Sony Service Center.
❏
Make sure the power cord is plugged in.
❏
Press POWER/STANDBY on the front panel of the LCD projection TV.
❏
Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV,
and when watching connected equipment, set to VIDEO 1, 2, 3, 4, 5, 6 or 7.
❏
The Parental Control feature is activated (see “Using the Parent Menu” on
page 69).
❏
If your LCD projection TV’s power is on, and the LAMP (red) indication is
flashing, the lamp for the light source has burnt out. Replace it with new Sony
XL-2100U or XL-2100 replacement lamp (see page 15).
❏
Try another channel; it could be station trouble.
(Continued)