Sony KF-42WE620 - Manual (Page 43)

Installing and Connecting the LCD Projection TV
43
In
sta
lling
and
Conne
ctin
g the
LCD Pr
o
jec
tion T
V
KF-42/50WE620
2-108-981-13(1)
Connecting a Digital TV Receiver with Component Connectors
Disconnect all power sources before making any connections.
Be sure to read the digital TV receiver’s manual.
1
Using three separate component video cables, connect the digital TV
receiver’s Y, P
B
and P
R
jacks to the LCD projection TV. Use the HD/
DVD IN 5 or 6 inputs.
2
Using audio cables, connect the digital TV receiver’s AUDIO OUT
jacks to the LCD projection TV’s AUDIO/VIDEO IN jacks (HD/DVD
IN 5 or 6).
✍
The Y, P B and P R jacks do not provide audio, so audio cables must
be connected to provide sound.
✍
Component video connection is necessary to view 480i, 480p, 720p,
and 1080i formats. For 480i signal, you may also use the S VIDEO or
composite video connections, however, component video (Y, P
B , P R )
will provide the best picture quality for all format types.
z
Component
video cable
(not supplied)
Digital TV receiver
Audio cable (not supplied)
AUDIO-R
(red)
Rear of LCD projection TV
Y
P B
P R
AUDIO-L
(white)
✍
You cannot record the signal from any equipment connected into the
Y, P
B
and P
R
connectors.
✍
This LCD projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.