Sega 999-0886-01 - Manual (Page 14)

9 www.seuservice.com
4 . ASSEMBLING AND INSTALLATION
Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width
across flats are required for the assembly work.
When carrying out the assembly work, follow the procedure in the following 5-item sequence:
ASSY OF THE REAR CABI (COCKPIT)
ASSY OF BILLBOARD
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
POWER SUPPLY
ASSEMBLING CHECK
Assembling should be performed as per this manual. Since this is a complex
machine, erroneous assembling may cause damage to the machine, or malfunc-
tioning to occur.
When assembling, be sure to perform work by plural persons.
Depending on the assembly work, there are some cases in which performing the
work by a single person can cause personal injury or parts damage.
Permanantly tightening the
hex bolts should not be
completed until the leg
levelers are adjusted prop-
erly.
1
ASSY OF REAR CABI (COCKPIT)
1
2
3
4
5