Sega 999-0886-01 - Manual (Page 27)

22 www.seuservice.com
7 - 2 SYSTEM TEST MODE
The contents of setings chnaged in the TEST mode are stored when the TEST mode is finished from
EXIT in the MENU mode. If the power is turned off before the TEST mode is finished, the contents of
setting chnage become ineffective.
Executing “BACKUP DATA CLEAR” in the SYSTEM TEST MODE does not clear the BOOKKEEP-
ING data in the GAME TEST MODE.
Entering the TEST mode clears fractional number of coins less than one credit and BONUS ADDER
data.
The SYSTEM TEST mode mainly allows for IC Board functioning check, monitor adjustment, coin assign-
ments, etc. For details, refer to NAOMI SERVICE MANUAL. The following assignments, however, should
be designated for this product.
CABINET TYPE: 1 PLAYER (S)
MONITOR TYPE: HORIZONTAL
COIN CHUTE TYPE: COMMON
7 - 3 GAME TEST MODE
Press the TEST button to display the SYSTEM TEST MODE MENU.
By pressing the SERVICE button, move the arrow ( >) to select the GAME TEST MODE.
Press the TEST button to enter GAME TEST MODE. The screen displays the GAME TEST MODE
MENU.
By pressing the SERVICE button, move the arrow ( >) to select the desired item. Press the TEST button to
execute the selected item.
Select EXIT and press the TEST button to exit from the GAME TEST MODE and return to the SYSTEM
TEST MODE MENU. Further, select EXIT and press the TEST button to finish SYSTEM TEST MODE
and return to the normal mode.