Sun Microsystems SERVER 1290 - Manual (Page 38)

26 Netra 1290 Server Installation Guide • May 2006
▼ To Install the CMA–800
Refer to FIGURE 1-19 , throughout the following procedure for identification of CMA
parts.
FIGURE 1-19 Upper and Lower CMA Arms, and Left-Hand and Right-Hand T-Brackets
Note – In the following procedure all left-hand and right-hand orientation is as
viewed from the rear of the server chassis.
Upper pivot
bracket
Hinge pin
Hinge pin
Upper CMA arm
Guide bar
Guide bar
Guide slot
Guide slot
Right hand
T-bracket
Lower CMA arm
Left hand
T-bracket
Lower pivot
bracket