Sony DAV-SC8 - Manual (Page 19)

Ge
tting Star
te
d
19 GB
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV to be connected.
The initial setting for Asian models is NTSC.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing "/1 while pressing the X button on the
system. You need to hold the X button until “DAV-SC8” appears on the display. To reset to NTSC,
turn off the system and then turn on again using the remote while press and hold the X button on the
system.
* If the colour system of the TV is NTSC, do the same operation above to set the system to NTSC.
To listen to the TV or game machine (ex: PlayStation 2) sound
by using the system
Connect the audio output jacks of the TV or game machine to the VIDEO 2 AUDIO IN jacks of the
system with the audio cords (optional).
S VIDEO
IN
INPUT
VIDEO
IN
INPUT
Y
P B /C B
P R /C R
COMPONENT
VIDEO IN
VIDEO
IN
R
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
L
VIDEO
OUT
R
AUDIO
OUT
L
OPTICAL
DIGITAL
OUT
COAXIAL
FM 75
OPTICAL
DIGITAL
IN
AM
CENTER FRONT L FRONT R
SURR L SURR R
SPEAKER
VIDEO OUT AUDIO OUT
VIDEO IN AUDIO IN
R L
R L
VIDEO 1 VIDEO 2
VIDEO IN AUDIO IN
R L
MONITOR OUT
COMPONENT
VIDEO OUT Y P B /C B P R /C R
VIDEO 2
SCAN SELECT
SELECTABLE
INTERLACE
COMPONENT
VIDEO OUT VIDEO
S VIDEO (DVD ONLY) SUB
WOOFER
AUDIO
OUT
IN
IN OUT OUT
IN IN
OUT
TV
VCR
Digital satellite receiver or
PlayStation 2 etc.
TV with S VIDEO IN jack TV with COMPONENT
VIDEO IN jacks
continued