Sony DAV-SC8 - Manual (Page 68)

68 GB
x DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
Be sure to change the value in the Setup Display
when you move the speakers.
Notes
• When you set the distance, the sound cuts off for a
moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• The DISTANCE setting is available except for Super
Audio CDs.
x LEVEL
You can vary the level of each speaker as
follows. Be sure to set “TEST TONE” to “ON”
for easy adjustment.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOLUME +/–.
x TEST TONE
The speakers will emit a test tone to adjust
“LEVEL” and “BALANCE.”
FRONT
3.0 m Front speaker distance from the
listening position can be set in 0.2
metre increments from 1.0 to 7.0
metres.
CENTER
3.0 m Centre speaker distance can be moved
up to 1.6 metres closer to the listening
position from the front speaker
distance, in 0.2 metre increments.
SURROUND
3.0 m Surround speaker distance can be
moved up to 4.6 metres closer to the
listening position from the front
speaker distance, in 0.2 metre
increments.
3m 3m
3m
3m 3m
CENTER
0 dB Adjusts the level of the centre
speaker (–6 dB to +6 dB, 1 dB
increments).
SURROUND
LEFT 0 dB
SURROUND
RIGHT 0 dB Adjusts the level of the surround
speakers (–6 dB to +6 dB, 1 dB
increments).
SUBWOOFER
0 dB Adjusts the level of the subwoofer
(–6 dB to +6 dB, 1 dB increments).
FRONT
(CENTER) Adjusts the balance between the front
left and right speakers.
OFF The test tone is not emitted from the
speakers.
ON The test tone is emitted from both left and
right speakers simultaneously while
adjusting balance. When you select one of
the “SPEAKER SETUP” items, the test
tone is emitted from each speaker in
sequence.