Samsung HT-DM150 User Manual

Page 43

Advertising
background image

MISCELLANENOUS

42

•

Is the TV power turned on?

•

Are the video cables properly connected?

•

Is it the player in PAUSE mode?

•

Is your TV’s video format (NTSC/PAL) set correctly?
Press the NTSC/PAL button once again to change the current selection.

•

Is there any dirt on the disc, or is the disc damaged?

•

It may not be possible to play some DVD discs due to poor manufacture.

•

When a dark scene changes to a bright scene during playback, the
screen may flicker vertically. Some disturbance is normal.

• The disc revolves but no

picture appears.

• Picture shows interference

and quality is poor.

•

Is the remote control being used within the appropriate distance
and angle of operation for the unit?

•

Are there any obstacles between the remote control unit and the
remote control sensor?

•

Are the batteries dead? Is it time to replace the batteries with new ones?

Remote control unit does
not operate.

•

The audio or subtitle language features does not operate with
DVDs that do not include multiple audio or subtitle languages.

Audio or subtitle language
does not operate.

•

Is the remote control being used within the appropriate distance
and angle of operation for the unit?

•

Are the batteries dead?

•

Does tje disc have a Menu?

The Menu button is
pressed but the Menu
screen does not appear.

•

While the player is in the stop mode, hold the Stop ( ) button
down on the main unit for over 5 seconds."INITIAL" appears on the
display and all settings will return to the Factory Preset condition.

The RESET function erases all settings; do not use this
function unless necessary.

The system is
malfunctioning (the
system does not work or
no sound).

•

Is the antenna installed properly?

•

When the antenna's input signal is weak, install an external FM

antenna in an area with good reception quality.

The desired radio station
cannot be tuned in.

Problem

Check

•

You can play 16:9 wide DVDs in 16:9 WIDE mode, 4:3 LETTER
BOX mode or 4:3 PAN-SCAN mode; but 4:3 encoded DVDs only
show in 4:3 ratio. Refer to the DVD disc jacket and then select the
appropriate function.

The screen ratio cannot
be changed.

Advertising