Samsung WEP 410 - Manual (Page 11)

8
Pairing will create a unique and encrypted wireless link between
two Bluetooth enabled devices, such as your Bluetooth phone
and Bluetooth headset.
1 Make sure that the headset is off (see Turning the headset
on/off).
Flashes in
blue every 3
seconds.
Quick series of
2 tones.
(Standby mode
starts.)
• The headset is in Standby mode.
• The headset is waiting for a call.
• The headset can be in Standby
mode up to 70 hours. *
Flashes in
red.
5 tones every
20 seconds.
The battery of the headset is low.
• There is less than 10% of battery
power left. Recharge the battery.
* Depending on the phone type and usage, the actual time may vary.
Pairing with your Bluetooth phone
When you turn on your headset for the first time, the
headset proceeds into Pairing mode so that you can
immediately pair it with other devices.
Light Tone Status
WEP410.book Page 8 Wednesday, April 4, 2007 1:43 PM