Spalding 21112201 - Manual (Page 10)

10
ID# 21112201 11/05
Lower clamp cover (6) over clamps and snap into
proper position.
;;;
;;;
Secure clamps (4) around pole section as shown.
Refer to Step 4. Tighten completely.
6
6
Remove pole cap from bottom pole section and insert
clamp cover (6) onto bottom section. Bend back
exposed top flange sections of secured ground sleeve
(1) as shown. Then insert pole into ground sleeve (1).
WARNING!
TWO PEOPLE REQUIRED FOR THIS
PROCEDURE. FAILURE TO FOLLOW
THIS WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
REMOVE BACKBOARD AND RIM
BEFORE REMOVING POLE FROM
GROUND SLEEVE. REQUIRES TWO
PEOPLE TO REMOVE POLE.
12.
13.
14.
;;
6
1