Control panel – Ardo WDN 1495 LW User Manual

Page 8

Advertising
background image

8

SM2716

CONTROL PANEL

SKIN CARE: Pressing the button F activates the skin care function, which carries
out an extra rinsing. The option is recommended for skins particularly sensitive to
the enzymes contained in detergents.

GB

DELAYED START: This function allows the start of the wash cycle to be delayed by
up to 16 hours. Press button B repeatedly until the required delay time appears on
the display. Icon h will fl ash on the display until the wash cycle starts.

PRE-WASH: To carry out a prewash, press button D and add detergent to the ap-
propriate compartment 1. The washing machine will carry out a prewash at 40°C max.
A Prewash is recommended for items soiled with dust, soil, sand or with particularly
resistant stains. See the Programme Table for further information.

LCD DISPLAY: The large LCD display makes the washing machine intuitive and
simple to use. The display shows the enabled wash functions, the Delayed Start if
activated, the selected spin speed and the time remaining until the end of the cycle.
The word End informs that the door has been unlocked.

Autoclean

TURBO: To reduce the wash time, press the Turbo button (E). The operating param-
eters are automatically regulated to ensure an effective wash and to save time. See
the Programme Table for further information.

ADJUSTABLE SPIN: Button C can be pressed to change the spin speed in line with
the wash programme selected and the type of fabrics. The selected spin speed will
appear on the LCD display. To disable the end of cycle spin, select value “00”.

N.B.: The maximum spin speed varies according to the model. The spin speed selected
by the programme is that recommended.

Load imbalance check during spinning:

This washing machine is fi tted with a special electronic load balancing control system. Before each

spin, the system makes sure that the clothes are distributed as uniformly as possible in the drum. If
the washing is not distributed uniformly, the fi nal spin speed is reduced for safety reasons, while if
the load is drastically out of balance, the spin is not effected.

Advertising