Sanyo SCP-7050 - Manual (Page 41)

3. Select a setting and press .
Tip: You can select Once or Repeat Alert if you select 10-4 Calls, 10-4
Missed, Voicemail or Messaging. Repeat Alert sounds an alert every two
minutes for twenty minutes. (For 10-4 calls, an alert sounds for 20
seconds continuously.)
Silence All
ᮣ With the phone open, press and hold down in standby
mode. (The screen will display “Silence All.”)
Ⅲ To deactivate, with the phone open, press up
repeatedly to select a volume level.
Tip: When Ringer Volume is set as Silence All , you are not able to
change the settings of Advanced Ringer , Application ,
Start-up/Pw-off or Key Beep . See “Adjusting the Application, Start-
up/Power-off, or Key Beep Volume”on page 30.
You can also select Vibrate All to set your phone to vibrate only.
33