Sony MSW-M2000 - Manual (Page 117)

Chapter 9
Setup Menus
Chapter 9 Setup Menus
9-17
Menu items in the range 600 to 699, relating to the time code generator (Continued)
Item number Item name Settings
608 PHASE CORRECTION Select whether or not to carry out phase correction control on the LTC generated
by the time code generator.
OFF : No control
ON: Carry out control.
609 TCG CF FLAG Select whether or not the color framing flag is set in the blank bit of the time code
data.
OFF : Color framing flag is not set.
ON: Color framing flag is set.
AUTO: Color framing flag is set or not depending upon the color framing phase
relationship between the recorded video signal and the time code signal.
When AUTO is selected, color framing is controlled as follows according to the
operating mode of the time code generator.
• In INT PRESET mode (the function menu item TCG (F1) is set to INT and TCG
(F2) set to PRESET, and in modes other than the automatic editing mode): the
time code signal is generated with color framing locked to the video signal, and
the color framing flag is set.
• In INT REGEN mode (the function menu item TCG (F1) is set to INT and TCG
(F2) set to REGEN, and in the automatic editing mode), and also in EXT mode
(the function menu item TCG (F1) is set to EXT): the time code signal is
generated without color framing locked to the video signal, and the color framing
flag is not set.
610 REGEN CONTROL
MODE In editing performed using the control panel of this unit, select whether or not the
time code is automatically regenerated.
AS&IN : In automatic editing with this unit as the recorder, regardless of the
settings of the function menu items TCG (F1) and TCG (F2), in assemble and
insert editing, the time code generator regenerates according to the time code
on the tape.
ASSEM: In automatic editing with this unit as the recorder, regardless of the
settings of the function menu items TCG (F1) and TCG (F2), in assemble
editing only, the time code generator regenerates according to the time code
on the tape.
MANU: Regardless of whether this unit is the recorder or player, the time code
generator operates in accordance with the settings of the function menu items
TCG (F1) and TCG (F2).
FULL: Whether local or remote and regardless of the settings of the function
menu items TCG (F1) and TCG (F2), when any of the ASSEMBLE, VIDEO,
AUDIO CH1 to CH8, and TC buttons is lit, the time code generator regenerates
according to the time code played back from the tape.
Note
With this menu it is possible to generate timecode (LTC/VITC) only.
Regardless of the setting of menu item 605, user bits (LUB/VIUB) follow the
setting (PRESET/REGEN) of function menu TCG (F2).