Sony MSW-M2000 - Manual (Page 136)

Appendix
A-2
Appendix
Specifications
Recommended tapes
MPEG IMX cassettes (S, L):
BCT-6MX/12MX/22MX/32MX/
60MX
BCT-64MXL/94MXL/124MXL/
184MXL
Digital Betacam cassettes (S, L)
(for playback only) (MSW-
M2000/M2000P)
Betacam SX cassettes (S, L) (for
playback only)
Betacam SP cassettes (S, L) (for
playback only)
Betacam cassettes (S, L) (for
playback only)
Digital video system
Digital video signal system
Sampling frequency
Y: 13.5 MHz
R–Y/B–Y: 6.75 MHz
Quantization 8 bits/sample
Compression MPEG2 4:2:2P@ML
Channel coding S-I-NRZI PR-IV
Error correction Reed-Solomon code
Analog component output
Bandwidth
Y 0 to 5.75 MHz +0.5 dB/–2.0 dB
R–Y/ B–Y 0 to 2.75 MHz +0.5 dB/–2.0 dB
S/N ratio 56 dB or more
K factor (2T pulse)
1% or less
Analog component input to analog
component output
Input A/D quantization
10 bits/ sample
Bandwidth
Y 0 to 5.75 MHz +0.5 dB/–2.0 dB
R–Y/ B–Y 0 to 2.75 MHz +0.5 dB/–2.0 dB
S/N ratio 52 dB or more
K factor (2T pulse)
1% or less
LF non-linearity 3.0% or less
Analog composite input to analog composite
output
Bandwidth (Y)
0 to 5.75 MHz
+0.5 dB/ –2.0 dB
S/N ratio 53 dB or more
Differential gain 2% or less
Differential phase 2° or less
Y/C delay
20 ns or less
K factor (2T pulse)
1% or less
Output SCH phase
Based upon RS-170A/CCIR
R.624-3
(Adjustable by using the menu)
Digital audio system
Digital audio (CH1 to CH8) signal format
Sampling frequency
48 kHz (synchronized with video)
Quantization 16 bits/sample or 24 bits/sample
Wow and flutter Below measurable level
Headroom 20 dB (or 18 dB, selectable)
Emphasis T1= 50 µs, T2=15 µs (on/off
selectable in recording mode)
Analog output
A/D, D/A quantization
24 bits/sample
Frequency response
20 Hz to 20 kHz +0.5 dB/ –1.0 dB
(0 dB at 1 kHz)
Dynamic range 90 dB or more (at 1 kHz, emphasis
on, 16 bits/48 kHz)
95 dB or more (at 1 kHz, emphasis
on, 24 bits/48 kHz)
Distortion 0.05% or less (at 1 kHz, emphasis
on, reference level (+4 dBm))
Crosstalk –80 dB or less (at 1 kHz, between
any two channels)