Socket Mobile 3E - Manual (Page 25)

6. Use the Configure screen to configure basic SocketScan options:
For help on SocketScan, tap on the symbol in the upper
right corner.
• Scan Trigger Button: Tap to select the hardware button you would
like to use to trigger the scanner. In the screen that appears, select the
hardware button and tap OK.
At this time, Palm utilities do not allow assignment of the
Record or Voice button as a trigger.
• Sound on Good Read: Check if you would like the device to make a
sound whenever the scanner successfully reads a bar code. In the
drop-down menu, select the sound you want.
• Sound Volume: Select the sound volume used to indicate good reads.
• Insert Special: Make sure the cursor is in either the Prefix or Suffix
field. Use the Insert Special drop-down menu to select a special
function or data (e.g., time stamp) to insert before or after each scan.
CHAPTER 3: SETUP FOR PALM 25