Ad v a nced f e atures, Changing crossover frequency – Sharp SD-HX600 User Manual

Page 56

Advertising
background image

E-51

SD_HX600_SEC_SECL_E5.fm

04/3/15

ENGLISH

TINSKA016AWZZ

SD-HX600

Ad

v

a

nced

F

e

atures

- Cha

n

ging the

de

fa

ult s

e

ttings

of the

a

m

pli

fie

r -

Changing the default settings of the amplifier (continued)

!

Changing crossover frequency

Change the level above which subwoofer frequencies are cut, to adjust the balance
with the front speakers. When the speaker setting is "SMALL", low frequencies from
the speaker are cut. It is recommended to set the level slightly above that of the low-
est front speaker frequency (the lowest reproducible frequency).

(*) indicates the default setting.

Note:

The crossover frequency setting is invalid when playing DVD-Audio discs.

Note:

You cannot change the amplifier settings unless the input source is set to DVD/CD.

1

Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.

2

Within 10 seconds, press the or button to
select "X-FREQ", and press the ENTER but-
ton.

3

Within 10 seconds, press the or button to
select frequency and press the ENTER but-
ton.

4

Press the RETURN

button twice.

The setting is complete.

Adjustable frequency

range

Recommended frequency range

80 Hz

The lowest reproducible frequency of the front speakers
is below 80 Hz.

100 Hz *

The lowest reproducible frequency of the front speakers
is between 80 and 100 Hz.

120 Hz

The lowest reproducible frequency of the front speakers
is between 100 and 120 Hz.

150 Hz

The lowest reproducible frequency of the front speakers
is between 120 and 150 Hz.

In the stop mode, you can change the amplifier settings on the TV
screen.

1

Set the MODE 1/MODE 2 switch to MODE
2 and press the AMP SET UP button.

The amplifier setting screen appears.

2

Press the or button to select the menu and press the ENTER
button.

3

Press the , , or button to change the
setting and press the ENTER button.

Repeat the operation as instructed.

(The number of repetition depends on the setting item.)

To change other settings, begin from step 2.

4

Press the RETURN

button twice.

The setting is complete.

SPEAKER SIZE
SPEAKER DELAY
SPEAKER LEVEL
TEST TONE
CROSSOVER

AMPLIFIER SETUP

SELECT

RETURN

ENTER

ENTER

FRONT
CENTER
SURROUND
SUB WOOFER

SMALL
SMALL
SMALL
YES

SPEAKER SIZE

SELECT

RETURN

CHANGE

Advertising