SRS Labs Projector 8953H - Manual (Page 71)

71
4. Management with Web browser software
4.1 Configuring and controlling the projector via a web browser (Continued)
4.1.4 Port Settings
Displays and configures communication port settings.
Item Description
Network Control Port1
(Port:23)
Configures command control port 1 (Port:23).
Port open Click [Enable] check box to use port 23.
Authentication
Click [Enable] check box when authentication is required for
this port.
Network Control Port2
(Port:9715)
Configures command control port 2 (Port:9715).
Port open Click [Enable] check box to use port 9715.
Authentication
Click [Enable] check box when authentication is required for
this port.
SNMP Port Configures the SNMP port.
Port open Click [Enable] check box to use SNMP.
Trap address
Configures the destination of the SNMP Trap in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
SMTP Port Configures the SMTP port.
Port open Click [Enable] check box to use the e-mail function.
Click [Apply] button to save the settings.