Sony 3-094-057-22(1) - Manual

3-094-057-22(1)
Sony Corporation © 2007 Printed in Malaysia
Video components/ Componentes de vídeo
HDMI DVD IN VIDEO 2/BD IN OUT
SA-CD/CD/CD-R D-LIGHT SYNC OUT TV
L
R OUT IN IN DVD AUDIO IN
VIDEO IN
VIDEO 1 AUDIO OUT
VIDEO OUT VIDEO OUT
AUDIO IN AUDIO OUT
VIDEO IN
L
R
L L
R
MONITOR
ANTENNA
AM
SUB WOOFER
VIDEO IN
Y
PB/CB
SAT IN VIDEO 1 IN DVD IN COMPONENT VIDEO
DIGITAL OPTICAL SAT IN
DVD IN
COAXIAL
VIDEO 2/ BD IN
R
SAT AUDIO IN
AUDIO
OUTPUT
OPTICAL OUTPUT
E
D
C C
G
F
COMPONENT VIDEO OUTPUT
Y
PB/CB
PR/CR
COMPONENT
VIDEO INPUT
PB/CB INPUT
Y L
R
PR/CR
G
PR/CR
MONITOR OUT
Y PB/CB PR/CR
HDMI DVD IN VIDEO 2/BD IN OUT
SA-CD/CD/CD-R D-LIGHT SYNC OUT TV
L R OUT IN IN SAT AUDIO IN
VIDEO IN
DVD AUDIO IN
VIDEO IN
VIDEO 1 AUDIO OUT
VIDEO OUT VIDEO OUT SAT IN MONITOR OUT VIDEO 1 IN SURROUND BACK
SURROUND CENTER FRONT
DVD IN
AUDIO IN AUDIO OUT
VIDEO IN L R L R L R L R L R
MONITOR COMPONENT VIDEO
DIGITAL OPTICAL SAT
IN
DVD
IN COAXIAL
ANTENNA VIDEO 2/
BD IN AM
SUB WOOFER SPEAKERS
10 mm
HT-DDW1600
Quick Setup Guide
Guía de instalación rápida
1: Installing speakers/
1: Instalación de los altavoces
2: Connecting the speakers/
2: Conexión de los altavoces
Y PB/CB PR/CR HDMI DVD IN VIDEO 2/BD IN OUT
SA-CD/CD/CD-R D-LIGHT SYNC OUT TV L R OUT IN IN SAT AUDIO IN
VIDEO IN
DVD AUDIO IN
VIDEO IN
VIDEO 1 AUDIO OUT
VIDEO OUT VIDEO OUT SAT IN MONITOR OUT VIDEO 1 IN SURROUND BACK
SURROUND CENTER FRONT
DVD IN
AUDIO IN AUDIO OUT
VIDEO IN L R L R L R L R L R MONITOR COMPONENT VIDEO
DIGITAL OPTICAL SAT
IN DVD
IN COAXIAL ANTENNA VIDEO 2/
BD IN AM
SUB WOOFER SPEAKERS
SURROUND FRONT
L
R
L
R
SPEAKERS
SS-MSP16 L SS-MSP16 R
Y PB/CB PR/CR HDMI DVD IN VIDEO 2/BD IN OUT
SA-CD/CD/CD-R D-LIGHT SYNC OUT TV L R OUT IN IN SAT AUDIO IN
VIDEO IN
DVD AUDIO IN
VIDEO IN
VIDEO 1 AUDIO OUT
VIDEO OUT VIDEO OUT SAT IN MONITOR OUT VIDEO 1 IN SURROUND BACK
SURROUND CENTER FRONT
DVD IN
AUDIO IN AUDIO OUT
VIDEO IN L R L R L R L R L R
MONITOR COMPONENT VIDEO
DIGITAL OPTICAL SAT
IN DVD
IN COAXIAL ANTENNA VIDEO 2/
BD IN AM
SUB WOOFER SPEAKERS
– +
CENTER
SS-CNP16
Y PB/CB PR/CR HDMI DVD IN VIDEO 2/BD IN OUT
SA-CD/CD/CD-R D-LIGHT SYNC OUT TV L R OUT IN IN SAT AUDIO IN
VIDEO IN
DVD AUDIO IN
VIDEO IN
VIDEO 1 AUDIO OUT
VIDEO OUT VIDEO OUT SAT IN MONITOR OUT VIDEO 1 IN SURROUND BACK
SURROUND CENTER FRONT
DVD IN
AUDIO IN AUDIO OUT
VIDEO IN L R L R L R L R L R
MONITOR COMPONENT VIDEO
DIGITAL OPTICAL SAT
IN DVD
IN COAXIAL ANTENNA VIDEO 2/
BD IN AM
SUB WOOFER SPEAKERS
SURROUND FRONT
L
R
L
R
SPEAKERS
SS-SRP16 SS-SRP16
Y PB/CB PR/CR HDMI DVD IN VIDEO 2/BD IN OUT
SA-CD/CD/CD-R D-LIGHT SYNC OUT TV L R OUT IN IN SAT AUDIO IN
VIDEO IN
DVD AUDIO IN
VIDEO IN
VIDEO 1 AUDIO OUT
VIDEO OUT VIDEO OUT SAT IN MONITOR OUT VIDEO 1 IN SURROUND BACK
SURROUND CENTER FRONT
DVD IN
AUDIO IN AUDIO OUT
VIDEO IN L R L R L R L R L R MONITOR COMPONENT VIDEO
DIGITAL OPTICAL SAT
IN DVD
IN COAXIAL
ANTENNA VIDEO 2/
BD IN AM
SUB WOOFER SPEAKERS
SURROUND BACK
SURROUND CENTER
L
R
SS-SRP16 B
3: Connecting other components/
3: Conexión de otros componentes
A
A
A
Satellite tuner or Set-top
box/Sintonizador vía
satélite o decodifi cador
Y PB/CB PR/CR
HDMI DVD IN VIDEO 2/BD IN OUT
SA-CD/CD/CD-R D-LIGHT SYNC OUT TV L R OUT IN IN SAT AUDIO IN
VIDEO IN
DVD AUDIO IN
VIDEO IN
VIDEO 1 AUDIO OUT
VIDEO OUT VIDEO OUT SAT IN MONITOR OUT VIDEO 1 IN SURROUND BACK
SURROUND CENTER FRONT
DVD IN
AUDIO IN AUDIO OUT
VIDEO IN L R L R L R L R L R MONITOR COMPONENT VIDEO
DIGITAL OPTICAL SAT
IN DVD
IN COAXIAL ANTENNA VIDEO 2/
BD IN AM
SUB WOOFER SPEAKERS
AUDIO OUT
SUB WOOFER
SA-WP16 SA-WP16
A
B
English
This Quick Setup Guide describes how to
connect a DVD player, satellite tuner or set-top
box, TV, speakers and sub woofers so that you
can enjoy multi channel surround sound. Refer
to the operating instructions supplied with the
receiver for details.
The illustrations in the guide designate speakers
as
 through  .
 Front speaker (left)
 Front speaker (right)
 Center speaker
 Surround speaker (left)
 Surround speaker (right)
 Surround back speaker
 Sub woofer
 Sub woofer
1: Installing speakers
The illustration above shows an example of six
speakers and two sub woofers confi guration.
Refer to the operating instructions supplied with
the receiver.
About speaker placement
The front speakers, center speaker and sub
woofers are magnetically shielded to allow it
to be installed near a TV set. However, as the
surround and surround back speakers are not
magnetically shielded, we recommend that you
place them slightly further away from a TV set.
2: Connecting the speakers
The illustrations above show how to connect the
speakers. Before you connect the speakers, check
the speaker label on the rear panel of the speakers
for the speaker type.
About speaker cords
• Black striped wire is minus (–) in polarity and
should be connected to the minus (–) speaker
terminal.
• Use the long speaker cords to connect the
surround and surround back speakers and the
short speaker cords to connect the front and
center speakers.
About speaker jacks
• Connect the  jack to the  jack of the
receiver and connect the  jack to the  jack
of the receiver.
• Refer to the illustration above for details of
connecting speaker cords.
3: Connecting other components
This is an example of how to connect this
receiver and your components. Refer to step 3
of “Getting started” of the operating instructions
supplied with this receiver for details on other
connections and other components.
4: Connect all power cords last
Connect the AC power cord to a wall outlet.
Refer to “Connecting the AC power cord” in the
operating instructions supplied with the receiver.
B
Español
Esta guía de instalación rápida describe cómo
conectar un reproductor de DVD, un sintonizador
vía satélite o un decodifi cador, un televisor, los
altavoces y altavoces potenciadores de graves
para que pueda disfrutar del sonido envolvente
multicanal. Consulte el manual de instrucciones
suministrado con el receptor para obtener más
información.
En las ilustraciones de la guía, los altavoces se
identifi can de
 a  .
 Altavoz frontal (izquierdo)
 Altavoz frontal (derecho)
 Altavoz central
 Altavoz de sonido envolvente (izquierdo)
 Altavoz de sonido envolvente (derecho)
 Altavoz posterior de sonido envolvente
 Altavoz potenciador de graves
 Altavoz potenciador de graves
1: Instalación de los altavoces
La ilustración anterior muestra un ejemplo de
confi guración de un sistema de seis altavoces y
dos altavoces potenciadores de graves. Consulte
el manual de instrucciones suministrado con el
receptor.
Sobre la ubicación del altavoz
Los altavoces frontales, el altavoz central y
los altavoces potenciadores de graves están
protegidos magnéticamente para que puedan
instalarse cerca de un televisor. Sin embargo,
debido a que los altavoces de sonido envolvente
y los altavoces de sonido envolvente posteriores
no están protegidos magnéticamente, se
recomienda situarlos a una distancia considerable
del televisor.
2: Conexión de los altavoces
Las ilustraciones que aparece más arriba
muestra cómo conectar los altavoces. Antes de
conectarlos, compruebe la etiqueta del altavoz
situada en el panel posterior de los mismos para
conocer el tipo de altavoz.
Acerca de los cables de los
altavoces
• El cable con rayas negras tiene una polaridad
negativa (–) y se debe conectar al terminal de
altavoz negativo (–).
• Utilice los cables largos de conexión de
altavoces para conectar los altavoces de
sonido envolvente y los altavoces de sonido
envolvente posteriores, y los cables cortos de
conexión de altavoces para conectar el altavoz
frontal y el central.
Note
To enjoy multi channel
surround sound when
connecting HDMI, be sure
to connect the digital audio
jack as shown and turn off
or mute the TV's volume.
Nota
Para disfrutar del sonido
envolvente multicanal con
conexión HDMI, asegúrese
de conectar la toma de
audio digital como se
muestra en la ilustración,
así como de desactivar o
silenciar el volumen del
televisor.
A Speaker cord (supplied)/Cables de los
altavoces (suministrada)
B Monaural audio cord (supplied)/Cable de audio
mono (suministrada)
DVD player/Reproductor de DVD TV/Televisor
C HDMI cable (not supplied)/Cable HDMI (no suministrado)
D Coaxial digital cord (supplied)/Cable digital coaxial (suministrada)
E Optical digital cord (not supplied)/Cable digital óptico (no suministrado)
F Audio cord (not supplied)/Cable de audio (no suministrado)
G Component video cord (not supplied)/Cable de componente
de vídeo (no suministrado)
Acerca de las tomas de los
altavoces
• Conecte la toma  a la toma  del receptor, y
conecte la toma  a la toma  del receptor.
• Consulte la ilustración anterior para obtener
más información sobre cómo conectar los
cables de los altavoces.
3: Conexión de otros
componentes
Este es un ejemplo de cómo conectar este
receptor a los componentes. Consulte el paso
3 de “Procedimientos iniciales” del manual de
instrucciones suministrado con el receptor para
obtener más información sobre cómo realizar
otras conexiones y sobre otros componentes.
4: Conecte todos los cables de
alimentación en último lugar
Conecte el cable de alimentación de ca a una
toma de pared.
Consulte el apartado “Conexión del cable de
alimentación de ca” del manual de instrucciones
suministrado con el receptor.
DDW1600_GBES_2UC A3.indd 1 DDW1600_GBES_2UC A3.indd 1 1/9/2007 8:47:18 AM 1/9/2007 8:47:18 AM