Samsung 5400 - Manual (Page 46)

46 Handbook
|
11 RING RESPONSE
This function controls how long your fax machine waits
before answering an incoming telephone call. The
available settings are 1 RING (default), 5 SECONDS, 10
SECONDS, 15 SECONDS, or 20 SECONDS.
! At the default 1-ring setting, your fax machine answers
calls immediately, and you will not hear any ring. If you
need to hear the ring, change to one of the other
settings.
12 DISTINCTIVE RING
Some telephone carriers offer a service called Distinctive
Ring. Distinctive Ring lets you have different numbers on
one line, each with its own distinctive ring. You can then
use one number exclusively as a fax number without the
expense of a second line. (Your local telephone carrier can
provide you with more information about this service,
which usually has an additional charge.) To use this
function, refer to Setting Distinctive Ring below.
Available settings are OFF (default) and ON.
! You must have your local telephone carrier’s Distinctive
Ring service.
Your fax machine must be in FAX or PC answer mode,
and the PBX dial parameter must be set to OFF. Other
modes—TEL, TEL/FAX, or TAD—will override
Distinctive Ring.
This feature may not work properly if you have a
telephone other than a genuine Oki optional handset
connected to your fax machine.
Setting Distinctive Ring
To set up your fax machine to recognize another ring
pattern:
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
The display shows
1:FUNC. PROGRAMMING.
3 Press the Yes
ᮤ key. The display shows
FUNCTION NO. [ ].