Samsung 5400 - Manual (Page 92)

92 Handbook
|
Initiating a Relay Broadcast
1 Load your documents.
2 Press the Select Function key.
3 Press the 4/Relay Initiate TX One Touch key.
a. The first time you use this feature, the display shows:
RELAY PASSWORD
ENTER [ ]
Using the numeric keypad, enter the 4-digit relay
password.
b. If you have already used this feature, the display
shows:
RELAY PASSWORD [XXXX]
where XXXX is the last password you used.
If the password is correct, go to step 4.
If you want to use a different password, press the No
ᮣ
key. Then use the numeric keypad to enter the
password for the relay key station you want to use.
4 Press the Yes
ᮤ key.
a. The first time you use this feature, the display reads:
REMOTE LIST NO. [ ]
ENTER 01-99
Using the numerical keypad, enter the 2-digit relay
group number for the group you want to fax to.
b. If you have already used this feature, the display
shows:
REMOTE LIST NO. [XX]
where XX is the last list number you entered.
If the list number is correct, go to step 5.
If you want to fax to a different list, press the No © key.
Then use the numeric keypad to enter the number of
the list you want to use.