Samsung BD-P2500 - Manual (Page 20)

0_ connections
connections
This section involves various methods of connecting the Blu-ray Disc Player to other
external components such as a TV.
CONNECTING TO A TV WITH AN HDMI CABLE (BEST QUALITY)
Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rear of the Blu-ray Disc Player
to the HDMI IN terminal of your TV.
Press the input selector on your TV remote control until the HDMI signal from the Blu-ray Disc Player appears on
your TV screen.
If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on
the remote control and select HDMI as the external source of the TV.
If the HDMI cable is connected or removed during playback of a CDDA, the player will stop playing.
If the player is connected to your TV in HDMI 1080p output mode, you must use a High speed(category2)
HDMI cable.
1.
2.
~
M
`
`
HDMI cable
(not included)
1 A