Samsung BD-P2500 - Manual (Page 50)

0_ system upgrade
system upgrade
Samsung may offer upgrades to your Blu-ray Disc Player's firmware in the future. To upgrade this firmware you must :
Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest firmware.
You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see “Upgrade
Manual” at the website mentioned above.
or
Connect this player's LAN terminal to the LAN terminal on your modem (see page 29) and follow the steps below.
FIRMWARE UPGRADE
With the unit in Stop mode/No Disc mode, press the MENU
button.
Press the ▲▼ buttons to select Setup, then press the ENTER
or ▶ button.
Press the ▲▼ buttons to select System Setup, then press the
ENTER or ▶ button.
Press the ▲▼ buttons to select System Update, then press
the ENTER or ▶ button.
The player will check the cable or network connection status
automatically. The connection checking window will be displayed.
If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
If the upgrade is not possible : You will see the following
description in the message box.
If the cable is not connected :
“Ethernet cable is not connected. Please, check the
Ethernet cable”
If the network connection has failed :
“This system can not connect to internet for update.
Please, check the network setup”
If no latest version is released (the latest version has been
already installed) :
"The latest version of the firmware is already installed.
There is no need to update."
If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.
If the server service is not available :
“ Update Server is under maintenance. Please try again later.”
1.
2.
1.
.
.
.
.
@
@
~
~
~
~
~
No Disc
Disclaimer
Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Setup
No Disc
Disclaimer
Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Setup System Update
Power On/Off sound : On
Persistent Storage Management
No Disc
Disclaimer
Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Setup System Update
Power On/Off sound : On
Persistent Storage Management
System Update
Now, Checking.
Please wait...
1 2 3 4
No Disc
Disclaimer
Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Setup System Update
Power On/Off sound : On
Persistent Storage Management
System Update
The new update data was found.
Current Version : XXXXX
New Version : XXXXX
1 2 3 4
Cancel Start
No Disc
Disclaimer
Setup
Language Setup
Audio Setup
Display Setup
HDMI Setup
Network Setup
Parental Setup
System Setup System Update
Power On/Off sound : On
Persistent Storage Management
System Update
This system can not connect
to internet for update.
Please, check the network setup.
1 2 3 4
OK