Samsung Digimax GX-1S - Manual (Page 174)

ŝ173Ş
Setting up the application software
2. After restarting the computer, connect the PC to the camera with the USB cable.
3. Turn the camera power on.
The [Found New Hardware Wizard] will open and the
computer will recognize the camera.
ſ If your OS is Windows XP, an image viewer program will
open.
If the download window of Digmax Master opens after
starting Digimax Master, the camera driver was setup
successfully.
Ү In this mode, you can download stored images to your PC through the USB cable.
Ү The LCD monitor is always turned off in PC mode.
ƈ Connecting the camera to a PC
1. Press the MENU button and select the [ Set-up] menu.
2. Set [Transfer Mode] on camera to [PC].
3. Connect the PC to the camera with the USB cable.
Starting PC mode