Siemens TC65 - Manual (Page 22)

TC65 JAVA User's Guide
Strictly confidential / Released
s
TC65 JAVA User's Guide_V05 Page 22 of 90 26.09.2005
4.4.1.5 State 5: Java Application Active, General Purpose I/O and I2C
The Java application is active, ASC1 is used as System.out and the Java instance of the RS-
232 serial interface is connected to ASC0. The Java application is activated with at^sjra. The
I/O pins are configured with
at^scpin or at^sspi . Refer to the AT Command Set [3] for AT
command details.
ASC 0
Java access to serial
interface (CommConnection)
Java AT command API
with CSD
AT parser 0
with CSD
Java AT command API
without CSD
AT parser
without CSD
Java AT command API
without CSD
AT parser
without CSD
up to 10 GPIO pins: ASC 1
System.out
I2C:
Figure 8: Module State 5
4.4.1.6 State 6: Java Application Active, General Purpose I/O and SPI
The Java application is running, ASC0 is used as System.out and the Java instance of the
RS-232 serial interface is connected to ASC1. The Java application is activated with at^sjra
(refer to the AT Command Set [3]).
ASC 0
Java access to serial
interface (CommConnection)
Java AT command API
with CSD
AT parser 0
with CSD
Java AT command API
without CSD
AT parser
without CSD
Java AT command API
without CSD
AT parser
without CSD
up to 10 GPIO pins SPI ASC 1
System.out
Figure 9: Module State 6