Star Micronics Star SCP700 Series - Manual (Page 84)

80
6) N=5 (Star mode)
n1 :Always “0”
n3 :Always “0”
(Default)
N=5 (ESC/POS mode)
n1 :Always “0”
n2 :Always “0”
n3 :Always “0”
(Default)
N=A
n1 :Always “0”
n2 :Always “0”
n3 :Always “0”
(Default)
Parameter Setting “0” “1” “2” “3”
n2 When slip printer <CR>
code is valid Print +
line feed
(CRLF) print
(CR) Print +
line feed
(CRLF) print
(CR)
n4 Initial status of the TOF/
BOF sensor Valid Valid Valid Valid
Slip printer automatic
clamp Valid Valid Invalid Invalid
Slip printer automatic
starting print positioning Valid Invalid Valid Invalid
Parameter Setting “4” “5” “6” “7”
n2 When slip printer <CR>
code is valid Print +
line feed
(CRLF) print
(CR) Print +
line feed
(CRLF) print
(CR)
n4 Initial status of the TOF/
BOF sensor Invalid Invalid Invalid Invalid
Slip printer automatic
clamp Valid Valid Invalid Invalid
Slip printer automatic
starting print positioning Valid Invalid Valid Invalid
Parameter Setting “0” “1” “2” “3”
n4 Slip printer automatic
clamp Valid Valid Invalid Invalid
Slip printer automatic
starting print positioning Valid Invalid Valid Invalid
Parameter Setting “0” “1”
n4 Receipt adherence-
prevention control Valid Invalid