Getting started, Unpacking – Sony HT-K250 User Manual

Page 4

Advertising
background image

masterpage:Left

filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]

4

GB

model name1[HT-K250]

[4-247-255-11(1)]

Check that the following items are supplied:

• Control center (1)

• Subwoofer (1)

• Micro satellite speakers (5)

• Control center stand and a screw (1 each)

• Remote commander (1)

• R6 (size AA) batteries (2)

• Speaker cords (long) (2)

• Speaker cords (short) (3)

• System cord (1)

• Optical digital cord (1)

• FM wire antenna (1)

• AM loop antenna (1)

• Speaker foot pads (20)

• Speaker sticker (1)

• Speaker adaptor for wall use and a screw (5

each)

• This Operating Instructions (1)

• Speaker installation guide (1)

Inserting batteries into the
remote

Insert two R6 (size AA) batteries with the + and
– properly oriented in the battery compartment.

Tip

Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the control center, replace both batteries with new
ones.

Notes

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not expose the remote sensor of the control center

to direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.

• If you do not use the remote for an extended period

of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.

• Turn off the power to all components before making

any connections.

• Be sure to make connections firmly to avoid hum and

noise.

Getting Started

1: Unpacking

Advertising