Sony WEGA KLV S23A10 - Manual (Page 49)

Using the Settings
49
U
s
ing
the
Setting
s
Selecting Audio
Options
The Audio settings includes the following options:
To highlight an option and to change settings, press
V v B b.
Press to confirm the selection.
Using the Audio Settings
To select the Audio settings
1. Press
WEGA GATE
2. Select
Settings
3. Highlight
Audio
4. Press
to select
To exit the Audio settings, press .
Sound Mode: Dynamic
Reset
Treble:
50
Bass: 50
Balance: 0
Steady Sound: Off
Effect: Off
MTS: Stereo
Speaker: On
Audio Out:
Audio TV
Dynamic
Natural
Clear Voice
Select: Exit: Back: Set: WEGA GATE
WEGA GATE
WEGA GATE
Option Description
Sound Mode
Customized
sound listening
Dynamic Select to enhance treble and bass.
Natural Flat setting.
Clear Voice Suitable for spoken dialogue.
Reset Reset bar adjustments to the default setting for each Sound
Mode ( Dynamic , Natural , Clear Voice ) (except for the options
grayed out).
Treble Adjust to increase or decrease higher-pitched sounds.
Bass Adjust to increase or decrease lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Steady Sound Auto Select to stabilize the volume.
Off Select to turn off Steady Sound .
Effect TruSurround Select for surround sound (for stereo programs
only).
Simulated Adds a surround-like effect to mono programs.
Off Select for normal stereo or mono reception.
MTS
Enjoy stereo,
bilingual and
mono programs
Stereo Select for stereo reception when viewing a
program broadcast in stereo.
Auto SAP Select to automatically switch the TV to second
audio programs when a signal is received. If no
SAP signal is present, the TV remains in Stereo
mode.
Mono Select for mono reception. Use to reduce noise
during weak stereo broadcasts.
z To change from one
Sound Mode option to
another, use SOUND on
the remote control.
z Treble, Bass and
Balance are adjustable
when the Audio Out
option is set to Variable.
z To change from one
Effect option to another,
use on
the remote
control.
z To change from one
MTS option to another,
use MTS/SAP on the
remote control.
z MTS is not available
when Video,
Component, HDMI or
PC input is selected.
(Continued)