Symphonic SF225B - Manual (Page 9)

PLAYBACK FUNCTION
NORMAL PLAYBACK
1 Insert the prerecorded tape.
The VCR will turn on. If the
safety tab has been removed,
the VCR will start playback
automatically.
2 Turn on the TV and set the TV to channel 3 or 4.
Now set the CH3/CH4 switch on the back of the VCR
to match the channel selected on the TV.
3 Begin playback by pressing the PLAY button.
● Tracking adjustment will be set automatically (Digi-
tal Tracking function) when you start playback. To
adjust the tracking manually, press the CHANNEL
Up or Down button on the VCR.
● When a tape has reached the end, the VCR will re-
wind the tape to the beginning, eject the tape, and turn
off the VCR automatically.
● S-VHS Quasi Playback (SQPB)
This unit allows you to view a tape recorded in S-VHS
format. (Noise lines may appear on the picture.)
4 To stop playback, press the STOP button.
STILL
You can freeze the picture on TV screen by pressing the
PAUSE/STILL button during playback.
● Usually there will be video "noise" lines (black and
white streaks or dots) on the screen. This is not a
fault of the machine but is a by-product of the
technology involved in producing a 2 Head VCR.
Only a tape recorded in the SLP mode will show a
clear picture. You can change position of the noise
lines on a still picture by pressing the PAUSE/STILL
button repeatedly.
● After the VCR has been in Still mode for 5 minutes,
it will stop automatically to protect the tape and the
video head.
● To return playback, press the PLAY button.
AUTO REPEAT PLAYBACK
Use this feature allows you to play a tape over and over.
1) Select main menu by pressing the MENU button.
2) Select "AUTO REPEAT" by pressing the ▲ or ▼
button.
3) Begin auto repeat playback by pressing the
B button
so that [ON] will appear next to "AUTO REPEAT"
on the TV screen.
● If the on-screen menu still remains, press the RE-
SET/EXIT button to exit the menu.
● You can set AUTO REPEAT to ON or OFF by press-
ing the AUTO REPEAT button on the remote con-
trol.
● To cancel the auto repeat mode, press the
B button
at step [3] so that [OFF] appear next to "AUTO RE-
PEAT" on the TV screen.
● When you set the auto repeat mode to [ON] while the
counter memory mode is ON, the VCR will exit the
counter memory mode automatically.
PICTURE SEARCH
If you jump or repeat the some scene in the playing pro-
gram, press the F.FWD or REW button.
● Press it again and the VCR will now search in super
high speed. (in the LP / SLP modes only)
0J11
H7740
- 9 - EN