Spalding M88604C1 - Manual (Page 15)

15 08/06 ID# M88604C1
13.
5
7
Refer To Instructions
Included With Rim
Hardware For Rim
Assembly.
3
Rim Assembly
6
13
7
IMPORTANT!
Carefully cut and peel
protective film away from
board prior to attaching rim.
Before starting rim assembly, tighten nut (26) until it is positioned 6-3/4” from
the end of the rod as shown (Figure A).
Remove rim cover (16), attach rim assembly (3) to backboard (13) and
reattach rim cover (16).
** For rim assembly, see instructions included with rim.
6-3/4”
FIGURE
A.
27
27
16
26
14